“THERMON” Terminator ZT-WP Adjustable Control Mechanical Thermostat Mineral Insulated – Tank Wall Mounted

£365.00

  • Terminator ZT-XP thermostats are designed for use as an adjustable control thermostat for freeze protection and temperature maintenance applications requiring pipe wall sensing.
  • The ZT is available in four temperature control and bulb exposure temperature ranges and has a flexible capillary amouring complete with capillary gland and insulation entry device.
  • Encased within an IP66 rated chassis to prevent ingress of water and dust, Terminator ZP is suitable for installation in hazardous and non-hazardous areas.
  • Up-front position of installation allows for easy access during assembly and for future maintenance.
Category:

Item Description

Thermon Terminator ZP adjustable control thermostats are designed to provide control of trace heating installations, including freeze protection and process temperature maintenance. Terminator ZP-WP thermostats are designed for tank wall mounting and feature a glass-reinforced polymer junction box and expediter and a capillary temperature sensor. 

Available in four temperature control and bulb exposure ranges, Terminator ZP thermostats can withstand a maximum pipe exposure temperatures ranging between of 250°C-500°C and be installed in temperatures as low as -60°C. With an enclosure rating of IP66, Terminator ZP thermostats can withstand ingress of water and dust and can be installed in hazardous and non-hazardous environments.

Terminator ZP-XP Thermostats are available in the following varieties:

  • ZT Mechanical thermostats ZT-C-500-MI-WP

For further information, please refer to the datasheet or make an enquiry.

 

Technical Info

Enclosure rating……………………………………………………. IP66
Maximum pipe exposure temperature……………………. 250°C
Minimum installation temperature…………………………… -60°C
Operating ambient temperature
-60°C ≤ Ta ≤ +55°C …………….16 Amps Max, T6 85°C
-60°C ≤ Ta ≤ +50°C …………..25 Amps Max, T5 100°C
Voltage rating…………………..230 Vac nominal up to 253 Vac1
Switch rating ……………………………25 A (Ohmic, NC contact)
Switch type …………………………………………………….Controller
Electrical connection2 ……………………………… Terminal block3
Adjustable control range4
ZT-C-100 ……………………………………….. 0°C to 100°C
ZT-C-200 ……………………………………….. 0°C to 200°C
ZT-C-300 ……………………………………….. 0°C to 300°C
ZT-C-500 …………………………………….. 20°C to 500°C
Maximum control differential/accuracy
ZT-C-100 …………………………………..7% / -1 K to +7K
ZT-C-200 ………………………………2.5% / -2 K to +10K
ZT-C-300 ………………………………2.5% / -2 K to +16K
ZT-C-500 ……………………………….2.5% / -2 K to +28K
Maximum bulb exposure temperature
ZT-C-100 …………………………………………………. 230°C
ZT-C-200 …………………………………………………. 230°C
ZT-C-300 …………………………………………………. 345°C
ZT-C-500 …………………………………………………. 530°C
Bulb dimensions/material/capillary length
ZT-C-100 ………………… 6 x 76 mm/stainless steel/1 m
ZT-C-200 ………………… 6 x 76 mm/stainless steel/1 m
ZT-C-300 ………………… 6 x 55 mm/stainless steel/1 m
ZT-C-500 ………………. 6 x 280 mm/stainless steel/1 m
Max. electrical switching frequency………….. 180 cycles/hour
Electrical durability operating cycles…….min. 100.000 cycles
Mechanical durability operating cycles…min. 300.000 cycles

Reviews

There are no reviews yet.

Be the first to review ““THERMON” Terminator ZT-WP Adjustable Control Mechanical Thermostat Mineral Insulated – Tank Wall Mounted”

Your email address will not be published. Required fields are marked *

Scroll to Top